Mark the holes with a pencil and drill a pilot hole if necessary.
Insert #8 or #10 x 1 1/2" long wood screws.
Bolt Mounted Legs
Work on the bottom side of the furniture.
Drill ½” hole into the frame of furniture centered to the size of the leg.
Align the center hole of the bolt plate to the hole you drilled in the frame.
Attach bolt plate with screws provided.
Place leg over bolt plate and thru the bottom of leg use a screwdriver to
tighten bolt to bolt plate. (Ball and Cone legs just need to be
turned by hand)
Insert plastic glide.
Box and Cube Legs
Work on bottom side of the furniture.
Place leg on frame.
Insert screws through bottom hole.
Holden Legs
Holden
Work on bottom of furniture.
Place Support on furniture, line up Bottom Leg to support. Large Holes facing up.
Insert screws through both parts. Fasten.
Insert Plastic Glides.
4817 W. Jefferson Blvd, Los Angeles, CA 90016 • PHONE: 1-877-FERROUS • PHONE: 323-734-7347 • FAX: 323-734-7128
